The “ MASTER CONTROLLED ” icon on each remote controller for the indoor units connected to the same outdoor unit or Branch Selector unit will start flashing.

Install the control wires for the unit and the remote controller at least 3.5 feet (1 meter) away from televisions or radios to prevent image interference or noise.

The controller is equipped with a power-saving function that darkens the display if there is no operation for a certain period of time. To make the screen light up again, press one of the buttons.

The customizable Daikin control system is built around the VRVsystem, and does not require advanced field engineering (i.e., programming) for the control of the VRVsystem, except for field settings …

New Generation – built on a solid foundation g VRV remote controller, the BRC1E72, has been upgraded. The BRC1E73 will still provi all the great features and options the market requires. It is …

When the remote controller does not work due to battery failure or the absence there of, use this switch which is located beside the discharge grille on the indoor unit.

Regarding the operation procedures of the remote controller, refer to the manual included to the corresponding remote controller.

The DZK BACnet Interface is a plug and play device, which, when connected to the DZK main control board and to a BACnet network, it configures itself and configures the main board to work with the …

Changing the Control Mode from DDC to TSTAT configures the controller to accept commands from a traditional thermostat instead of using the DDC controller application logic. Follow wiring modification …

ODU Operation Mode Communication Status ODU Alarm Status Defrost Mode Oil Return Mode Calculated Electric Power Calculated Electric Current Special Modes Outdoor Air Temperature …